Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
Operation
10.1
First use of the app
Before the meter can work with the app, make sure that Bluetooth is activated. Furthermore, the
access permissions for location and memory must be granted. These are used exclusively to
search for Bluetooth devices in the direct vicinity and to save the measurement data to the
smartphone as PDF files. The permissions can be granted, depending on the device, via Settings
-> Apps -> PCE-WMT 200-> Permissions. After the access permissions have been granted, the
app can be used to its full extent.
10.2
Connect to the meter
After starting the app, a Bluetooth connection to the meter can be established. It must be ensured
that the smartphone and the meter are not more than 5 ... 10 m apart. To establish the connection,
navigate to the corresponding menu by tapping on "Connection" in the main menu. Bluetooth
connections can be managed under "Connection". To establish a connection, a suitable meter
must be searched for. This can be initiated by tapping on the "SEARCH DEVICE" button. The
devices found are then displayed in a list, see figure.
© PCE Instruments
33
Werbung
Inhaltsverzeichnis
