Spare Parts/Accessories; Trouble Shooting; Fault Correction - Parkside PHSL 900 A3 Originalbetriebsanleitung

Spare Parts/Accessories

Spare parts and accessories can be obtained at
If you have issues ordering, please use the contact form. If you have any other questions,
contact the service centre (see "Service-Center" Page 37).
Pos. exploded drawing Description
1
2
43,44

Trouble Shooting

Problem
Device does not start
Device runs with inter-
ruptions
Blades become hot
www.grizzlytools-service.eu
Round handle with pivotal centre
shoulder strap
Carbon brush
Possible cause
Mains voltage not on
On/Off switch (16) defective
Worn carbon brushes
Defective motor
Power cable is damaged
Internal loose electrical
connection
On/Off switch (16) defective
Blades (1) are blunt
Blades (1) are notched
Too much friction due to lack
of lubrication

Fault correction

Check plug socket, cable, line
and plug, where appropriate,
have repaired through electrical
specialist
Repair by Service Centre
Check the cable and have it
changed by the Service Centre if
necessary
Repair by Service Centre
Have the blades (1) sharpened or
replaced (Service Centre)
Have the blades (1) checked or
replaced (Service Centre)
Oil the blades (1)
GB IE
order no.
91102876
72400021
91102871
35