Appliance Description; Hand Switch - Beurer MG 160 Gebrauchsanleitung

4. Appliance description

Massage seat cover (front)
1
2
3
4
5
6 7

hand switch

The control LEDs indicate which functions are currently selected and which massage zones are activated.
5. Start-up
• Remove all packaging and transport locks.
Ensure that the packaging foils do not fall into children's hands. Risk of suffocation.
• Check the device, power supply unit and all cables for damage.
• Secure the protective cover on the surface of the massage seat cover using
– the Velcro strips where the seat joins with the backrest,
– on the reverse side under the seat surface and
– at the top in the shoulder area.
It is also possible to massage without the protective cover; this is generally found to be "harder" and more
intensive.
• Position the seat cover on a suitable seat with seating surface and backrest (chair, sofa, or similar). Ensure
that the seat cover is supported over its entire area and has a sufficiently high backrest.
• Use the flexible fastening straps and Velcro strips to secure the seat cover.
• Connect the power supply unit and the seat cover with the plug connector.
1 Protective cover
2 6 massage motors
3 Fastening straps
4 Connecting coupling
5 Power supply unit with plug connector
6 Hand switch
3
7 Storage bag
1
1 ON/OFF button with control LED
Switch on and off
2
3 2 INTENSITY button with control LEDs
Select massage intensity
4
3 HEAT button with control LED
Switch the heat function on and off
5
4 MASSAGE ZONE button with control LED
6
Switch the various massage zones on and off
5 PROGRAM button with control LEDs
7
Select massage program
6 TIMER button with control LEDs
Select switch-off times
7 Connection cable to the device
11