Cable Routing How-To - Rocky Mountain ELEMENT CARBON Bedienungsanleitung

Element Carbon Platform Manual

Cable routing how-to

11
CABLE ROUTING HOW-TO
Removing the rear wheel and rear shock will allow you to cycle the rear triangle and give better access to direct the housing in the area between
the chain stay and main pivot. Cycling the rear triangle as you push the housing forward also reduces friction as the housing moves through the
bottom bracket port.
The tube-in-tube channels in the chainstay can be a tight fit, especially with the curves they have to navigate to get around the chainstay bridge.
Spray soapy water or isopropyl alcohol into the opening as a lubricant to help with fitting the housing from one end to the other. Do not use grease
or oil; this will leave a mess and attract dirt.