Moon Phase; Wireless Sensor Signal Receiving; Time Synchronize Status; Wi-Fi Connection Status - Bresser 7003200 Bedienungsanleitung

4.3.13

MOON PHASE

The moon phase is determined by time and date
of the console. The following table explains the
moon phase icons of the Northern and Southern
Hemispheres. Please refer to section 6.3 web
interface about how to setup for the Southern
Hemisphere.
4.3.14

WIRELESS SENSOR SIGNAL RECEIVING

1. The console display signal strength for the wireless sensor(s), as per table below:
Outdoor 7-in-1 sensor
Hydro-thermal sensor
channel
Other optional sensor
2. If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear.
The temperature and humidity will display "Er" for the corresponding channel.
3. If the signal does not recover within 48 hours, the "Er" display will become permanent. You need to
replace the batteries and then press [ SENSOR / WI-FI] key to pair up the sensor again.
4.3.15

TIME SYNCHRONIZE STATUS

After the console has connected to the PWL, it can get the time from
PWL that according to your selected time zone in PWL. The "
icon will appear on the LCD.
The time will automatically synchronize per hour. You can also press the [ REFRESH ] key to get the
Internet time manually within 1 minute.
4.3.16

WI-FI CONNECTION STATUS

WI-FI icon on the console display indicates the console's connection status with WI-FI router.
connection with WI-FI router
No signal
Stable: Console is in
Northern
Moon Phase
Hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Crescent
Weak signal
"
Flashing: Console is trying
to connect to WI-FI router
59
Southern
Hemisphere
Waning
Good signal
EN