Wind Chill; Dew Point; Indoor / Channels Temperature & Humidity; Indoor Temperature & Humidity - Bresser 7003200 Bedienungsanleitung

4.3.4.3 WIND CHILL

A combination of the wireless 7-IN-1 sensor's temperature and wind speed data determines the current
wind chill factor. Wind chill number are always lower than the air temperature for wind values where the
formula applied is valid (i.e. due to limitation of formula, actual air temperature higher than 10°C with wind
speed below 9km/h may result in erroneous wind chill reading).

4.3.4.4 DEW POINT

- The dew point is the temperature below which the water vapor in air at constant barometric pressure
condenses into liquid water at the same rate at which it evaporates. The condensed water is called dew
when it forms on a solid surface.
- The dew point temperature is determined by the temperature & humidity data from wireless 7-IN-1 sensor.
4.3.5 INDOOR / CHANNELS TEMPERATURE & HUMIDITY
This section can show reading and status of the indoor, optional hygro-thermo sensor(s) and water leak
sensor(s).
4.3.5.1 OVERVIEW
1. Auto loop icon
2. Indoor icon
3. Channel number and sensor signal strength icon
4. Channel sensor low battery indicator
5. Floating pool sensor icon
6. Soil moisture sensor icon
7. Water leak sensor status section
8. Comfort indication icons
9. Humidity reading section
10. Temperature reading section
4.3.5.2 INDOOR TEMPERATURE & HUMIDITY
The indoor reading is default mode of the console.
This mode shown below information:
- Comfort indication
- Temperature and humidity reading of indoor
4.3.6

MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS

You can add up to 7 additional Thermo-Hygrometer sensor (optional, refer
to section 3.2). Press the [ CHANNEL ] key to switch between indoor and
Channels 1 to 7.
For auto-scroll function, just press and hold the [ CHANNEL ] key for 3
seconds and the icon will appear next to CH. The console will scroll the
readings of all the sensors every 3 seconds.
This mode shown below information:
- Channel number of the current sensor
- Comfort indication of this sensor
- Temperature and humidity reading of this sensor
- Signal strength of this sensor.
- Sensor type icon (for water pool or soil moisture sensor)
1
2
3
4
5
6
54
7
8
9
10