Security Devices Of The Kap 305Jl - HOLZMANN-MASCHINEN KAP 305JL Bedienungsanleitung

Remove all accessories and tools from the machine before you switch it on.
Use only saw blades that are suitable for the use with the KAP 305JL, espe-
cially regarding technical parameters, and which are tested and comply with
the directive EN 847-1.
Deflected, defect or worn saw blades have to be replaced immediately.
Blunt saw blades have to e sharpened or replaced.
Blunt saw blades highly increase the danger of kickback!
Assure yourself that the saw blade is correctly mounted and does not touch
the base plate.
Do not stop the saw blade by touching it on the side. This will ruin the drive
mechanism.
Do not manipulate or remove the saw blade protecting cover!
Do not fix small workpieces by hand, instead only use the downholder (10).
No material feed, no material removal, no adjustments or other activities
when saw blade is running.
Do not position your hands near the saw blade or in a way that they could
slip into the cutting line.
Long workpieces have to be supported by the double bar guide.
Take especially care when cutting round workpieces!
Check the workpiece for nails, clamps and other material!
DO NOT CUT FIREWOOD!
Just cut one workpiece at once. Do not stack or attempt to cut several work-
pieces in one cutting operation!
Even Lasers with relatively small output can harm your eyes! Therefore:
Never look directly into the laser or into the laser beam!
Never direct the laser beam towards reflecting surfaces, persons, animals.
Do not manipulate the laser device!

2.4 Security devices of the KAP 305JL

Fixed and moveable saw blade protection cover,

Security lock lever:

Prevents unintended lowering of the saw arm
Interlock knob and sliding device fixing knob for fixing the machine for transport.

HOLZMANN Maschinen Austria
Operation Manual KAP 305JL
www.holzmann-maschinen.at
SECURITY
Seite 25