Troubleshooting Table - hanseatic HKS 8555A2S Gebrauchsanleitung

Page EN-22

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appliance yourself. This may
put your own and future users' lives at risk. Only authorised specialists are allowed to
carry out this repair work.
Problem Possible cause
Compressor off, No electricity to socket.
interior light off.
Mains plug is loose.
Compressor off, The temperature controller
interior light on. (1) is set to '0'.
Desired temperature has
been reached.
Appliance cools The temperature controller is
too quickly. set at too high a level.
The appliance The temperature controller is
doesn't cool suffi- set at too low a level.
ciently.
Door not tightly closed or
door seal is not completely
tight.
The appliance is near a heat
source.
Food has been stored warm. Only store food that has cooled down.
Ambient temperature too low
or too high.
Compressor seems defec-
tive.
Interior lighting isn't Power supply is interrupted. Check the socket by connecting another
working.
Bulb faulty
All manuals and user guides at all-guides.com
Solutions, tips, explanations
Check the socket by connecting another
device.
Ensure the mains plug is securely plugged
in.
Turn the temperature controller to a higher
position (see „Setting the temperature" on
page EN-10).
Further cooling not required. When the
inside temperature rises, the compressor
automatically switches on.
Select a lower temperature (see page
EN-10).
Select a higher setting (see page EN-10).
See 'Checking and cleaning the door seals'
on page EN-14.
Place an insulation plate between the ap-
pliances or switch locations.
Adjust the ambient temperature to the cli-
mate class (see „Product fiche concerning
Regulation (EU) No 1060/201090" on page
EN-26).
Set the temperature controller to '7'. If the
compressor does not switch on within an
hour, inform our customer service team (see
page EN-25).
device.
Replace the bulb (see „Replacing the interi-
or light" on page EN-15).