Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting table
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the table to see if you can correct the
malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never attempt to repair the appliance yourself. You can put your own and future
users' lives in danger. Only authorised specialists are allowed to carry out this re-
pair work.
Problem
Possible cause
Compressor off,
Appliance is switched off.
interior light off.
No electricity to socket.
Mains plug is loose.
Compressor off,
Desired temperature has
interior light on.
been reached.
Appliance cools
Refrigeration level is set too
too quickly.
high.
The appliance
Refrigeration level is set too
doesn't cool
low.
sufficiently.
Appliance door not tightly
closed or door seal is not
completely tight.
The appliance is near a heat
source.
Food has been stored warm. Only store cooled foods.
Ambient temperature too low
or too high.
Compressor seems
defective.
Appliance is
Operating noises are
making a noise.
functional and are not a sign
of malfunction.
Disturbing noises.
Solutions, tips, explanations
Turn the temperature control dial (2) to a
position between "1" and "7".
Check the socket with another appliance.
Check the tightness of the mains plug.
Further cooling not required. When the
inside temperature rises, the compressor
automatically switches on.
Select a lower setting (see "Setting the
temperature" on page EN-10).
Select a higher setting (see "Setting the
temperature" on page EN-10).
See "Checking and cleaning the door
seals" on page EN-14.
Place insulation plate between the
appliances or change location.
Adjust ambient temperature (see "Intended
use" on page EN-4).
Set the appliance to maximum refrigeration
(see "Setting the temperature" on
page EN-10). If the compressor does not
switch on within an hour, please contact
our service department (see page EN-27).
Humming: Refrigeration unit is running.
Flowing noise: Refrigerant is flowing
through the pipes.
Clicking: Compressor is switching on or off.
Check the installation and re-adjust if
necessary.
Page EN-25
Werbung
Inhaltsverzeichnis
