Audio In - auna MC-20 Bedienungsanleitung

Notes:
• If the signal is weak, the BT receiver of your device may terminate the
connection. However, the unit will automatically reconnect to your
external BT device.
• Remove any obstacles between the external device and the DAB radio
so that you have better signal reception.
• This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video Remote Control Profile) functions. The unit cannot
be connected to multiple BT devices at the same time.
• There is no guarantee that the unit is compatible with all other external
devices and media types.
• Some mobile phones with BT function automatically disconnect the BT
connection to the unit when receiving or making calls. This is not an
indication of a problem with the unit.

AUDIO IN

1. There is an Audio In socket located on the front of the unit. Analogue
audio signals from other audio sources can be plugged into this socket.
2. Connect the jack via AUX cable (not included) to the jack of another
audio device.
3. Press the CD / AUX button several times or press the audio-in button on
the remote control to select the AUX mode.
4. To adjust the volume, turn the volume control or press the VOL +/-
buttons on the remote control.
5. In AUX mode, you can make settings directly on the external device to
change the playback function.
To connect an external audio device, please refer to the operating
instructions of the corresponding weather service.
Examples of external audio devices that can be connected to the unit are:
Portable MP3 players, cassette players, mini disc players, DVD players, etc.
EN
49