auna MC-20 Bedienungsanleitung Seite 45

Audio mode
Press the MONO/STEREO button on the remote control to switch between
stereo and mono modes.
Station memory
You can store up to 20 of your favourite channels in the channel list. This
allows you to tune in to your favourite stations quickly and easily.
1. To save a station, you must first play it back. Press and hold the
MEMORY button. The screen will show "save to P#".
2. Press the CH+ or CH- buttons to select the desired memory location.
Press the ENTER button to confirm.
3. The station will be saved within a few seconds and the screen will show
"Station saved on P#".
Recalling a saved station
1. Once you have assigned a station to a memory location, you can recall
it by pressing the MEMORY button.
2. Press the CH- key until the station you want is displayed on the screen.
Press the ENTER key to start playback of the station.
FM display modes
When you press the INFO button on the remote control, the screen
will cycle through the following display modes. The information of the
respective display mode is shown in the lower section of the screen.
Radio Text
As with DAB, the radio station can display programme information in the
form of scrolling text during the transmission.
Programme type
This shows the "style" or "genre" of the programme being broadcast.
EN
45