Introduction; Unpacking And Inspection - Mettler Toledo JAGXTREME Installationsanleitung

1

Introduction

Note: The documentation CD-ROM
contains a copy of this installation
guide, as well as other documentation
needed for installing, configuring,
operating, and servicing the terminal.
The CD-ROM also includes software
utilities that can be used with the
terminal. Refer to the technical manual
for more information.
Unpacking and
Inspection
1-1
Introduction
The following information is intended ONLY to help you install the JAGXTREME terminal
and connect the external wiring. Please read the information thoroughly before
beginning installation as separate instructions are provided for the various enclosure
types: general purpose, panel-mount/panel-mount blind chassis, and harsh
environment wall mount.
Any internal wiring, installation of options or programming should be performed only by
qualified technicians. This information is found in the JAGXTREME Terminal Technical
Manual provided on the Documentation CD-ROM included with the terminal.
1. If upon delivery the shipping container for the terminal appears damaged, check
for internal damage and file a freight claim with the carrier if required.
2. If the container is undamaged, unpack the terminal from its protective package
and inspect each component for damage.
3. Verify that you have the correct package contents. To install the terminal, you
need the terminal, the screwdriver provided, and these instructions. You may
also need common hand tools, such as flat and Phillips head screwdrivers for
the general purpose unit and a drill and wrenches for use with the harsh
environment unit. All other package contents should remain in the box.
Package contents for all JAGXTREME terminals include:
• JAGXTREME terminal
• Installation Guide
• Weights and Measures sealing
screws
• Mating connectors for the I/O port
Package contents for the panel-mount and blind chassis JAGXTREME terminal
also include:
• Hardware kit (*)15411600A
Package contents for the harsh environment JAGXTREME terminal include:
• 2 stainless steel wall mount brackets
• 4 stainless steel bolts for attaching the wall mount brackets
• Hardware kit (*)15411500A
Package contents for the general purpose JAGXTREME terminal includes:
• Hardware kit (*)15411400A
Chapter 1: Introduction
• Screwdriver
• Set of capacity labels
• JAGXTREME CD-ROM with documentation
and utilities
(02/05)
Introduction