I/O Port - Samsung SCC-C6475 Benutzerhandbuch

Active Time of Transfer
G
- Able to set the time limit for the alarm image transfer.
- In case of setting Always, image will be transferred whenever alarming.
- In case of setting Only Scheduled Time, image will be transferred only the
defined date and time for the related alarm even when alarming.
G Schedule Transfer Setup
- Transfer the image at the date and time automatically when the user
defines.
3-51

I/O Port

Consists of 4 Alarm inputs and 3 Alarm outputs and functions to execute
connecting Preset or Pattern to detect the Alarm input from the external
Sensor, and output the Alarm output signal from the outside. If the Alarm signal
input lasts over 150 ms, it will be recognized as the Alarm signal. And the
Alarm operation time depends on the Preset Dwell Time to each Alarm and the
Pattern connection of it.
1. ALARM PRIORITY SET
Set the priority of the 4 Alarm inputs and react the Alarm input according to
the priority.
Default priority is Alarm1: 1, Alarm2: 2, Alarm3: 3, Alarm4: 4
If alarming synchronously and setting the same priority, operates by the
Default priority. While alarming, Motion is not detected.
2. ALARM IN SET
Set the input Type as "NO" (Normal Open), "NC" (Normal Close), "Off"
according to the connected Sensor features.
3. ALARM OUT SET
Confront to one of the 3 Alarm outputs for each Alarm inputs
E
3-52