Image Screen Adjustment; Setting And Changing The Function; Setting The Basic Function; Video - Samsung SCC-C6475 Benutzerhandbuch

❖

Image screen adjustment.

8 direction key
Enter
Preset
8 direction key
G It moves the screen position to directions including UP, DOWN, LEFT, and
RIGHT.
G Press the button to move the screen, remove the button to stop.
Enter
G Enter function will be operated when Menu on mode.
Menu
G
Press the button, the main screen will be displayed.
Zoom In/Out
G Press the button and zoom function works, remove the button and zoom
function stops.
Focus Near/Far
G
Focusing while pressing the button and stopped when removing.
G This function works only in Manual Focus state.
Preset
G
Move the selected Preset item.
G Click the 'Refresh' button in the window that is appeared when pressing the
button, and it will display the latest Preset information set in the camera.
AutoPan
G
Execute the selected AutoPan item.
G Unable to use Preset, Scan, Pattern, Function while executing.
G
Stop executing if the user click the other control button.
G Click the 'Refresh' button in the window that is appeared when pressing the
button, and it will display the latest Autopan information set in the camera.
Scan
G Execute the selected Scan item.
G Unable to use Preset, AutoPan, Pattern, Function while executing.
G Stop executing if the user click the other control button.
G Click the 'Refresh' button in the window that is appeared when pressing the
button, and it will display the latest Scan information set in the camera.
3-29
Zoom In Focus Near
Menu
Focus Far
Zoom Out
AutoPan Scan Pattern
Function
Pattern
G
Execute the selected Pattern item.
G Unable to use Preset, AutoPan, Scan, Function while executing.
G
Stop executing if the user click the other control button.
G Click the 'Refresh' button in the window that is appeared when pressing the
button, and it will display the latest Pattern information set in the camera.
Function
G Execute the selected Scan item.
G Unable to use Preset, AutoPan, Scan, Pattern while executing.

5. Setting and Changing the function

❖

Setting the basic function

Video

E
3-30