15
Anhang: Zulassungen und Kennzeichnungen
15.1
Conditions of Acceptability
For use only in complete equipment where the acceptability of the combination is determined
by UL LLC:
(1)
(2)
(3)
(4)
(5)
(6)
V01.00 | 2021/09
This device is to be supplied from an isolated power supply.
The device is evaluated for use in Overvoltage Category II only.
This device provides overcurrent protection to each output.
The protection is achieved by means of internal supplementary fuses rated 5 A DC.
This device is provided with terminals suitable for factory wiring only.
The enclosure was evaluated for Type 1.
This device does not provide internal over temperature and overload protection for
the motor.
This device is not evaluated for functional safety.
119