Installation In The Radio Slot - Renkforce BT-RSD1802K Bedienungsanleitung

Mechanical Installation

Installation in the Radio Slot

• Unlock the installation frame with the two unlocking keys (figure 1, item 1).
• Remove the installation frame towards the back of the system (figure 1, item 2).
• Insert the frame into the respective cut-out in the vehicle (figure 2).
• Bend down some clips in the installation frame until the frame is securely fastened in the recess (figure 3).
• When you have made all the electrical contacts (see "Electric Connection") insert the SD tuner into the frame until
it locks in (figure 4).

Keep the two unlocking keys. You will need them for a later removal of the SD tuner.
• Protect your SD tuner from vibrations with the bolt at the back of the unit.
• In most vehicles, such a safety fastening is provided for. If this is not the case in your car, fasten the SD tuner
with the enclosed punched metal strip.
For the fastening, proceed as shown in the following figure:
50

Operating Instructions
English