Set-Up Instructions - Skandika Vidar Bedienungsanleitung

21
SET UP INSTRUCTIONS
STEP 1: ATTACHING THE STABILIZERS
First attach the front and rear stabilizer (34=front and 47=rear) to the main frame (29). This requires 2 screws (20)
and 2 washers (26) each, which you must rst remove from the respective stabilizer. Tighten the connections well.
The height adjusters on the rear stabilizer (47) must be used to compensate for any unevenness of the oor. To do
this, turn the adjusters until the unit stands rmly and without wobbling on the oor. The front stabilizer (34) is
equipped with castors to make it easier to move the unit from place to place (Attention: To protect the oor, place
a pad underneath!).