About This Document; General Safety Precautions - STEINEL XLED CAM 1 SC Installationsanleitung

GB

1. About this document

– Under copyright. Reproduction either
in whole or in part only with our
consent.
– Subject to change in the interest of
technical progress.
2. General safety
precautions
Failure to observe these op-
!
erating instructions presents
hazards!
These instructions contain important
information on the safe use of this
product. Particular attention is drawn to
potential hazards. Failure to observe this
information may lead to death or serious
injuries.
• Read instructions carefully.
• Follow safety advice.
• Keep instructions within easy reach.
– Working with electrical current may
produce hazardous situations.
Touching live parts can result in elec­
trical shock, burns or death.
– Work on mains voltage must only
be performed by qualified, skilled
personnel.
– National wiring regulations and elec­
trical operating conditions must be
observed (e.g. DE: VDE 0100,
AT: ÖVE­ÖNORM E8001­1,
CH: SEV 1000).
– Only use genuine replacement parts.
– Repairs must be made by specialist
workshops.
3. XLED CAM 1 SC
Proper use
Sensor­switched floodlight for indoor
and outdoor wall mounting.
Features
– Adjustable floodlight head.
– Integrated camera with dazzle guard.
– 16 GB memory card.
– Intercom system.
– Reset function.
– Operation via Steinel CAM app.
Operating principle
– The integrated infrared sensor de­
tects the heat radiated from moving
objects (e.g. people, animals).
– The heat detected in this way is
converted electronically into a signal
that switches the sensor­switched
floodlight ON automatically.
– The most reliable way of detecting
motion is to install the unit with the
sensor aimed across the direction in
which a person would walk.
– Reach is restricted when the unit is
approached head on.
– Obstacles (e.g. trees, walls etc.)
interrupt the line of sensor vision.
– Heat radiation is not detected
through obstacles (e.g. walls or
panes of glass), the sensor is not
triggered.
– Sudden fluctuations in the tempera­
ture from changes in weather are not
distinguished sources of heat.
– The camera and intercom system are
controlled via the Steinel CAM app.
Package contents (Fig. 3.1)
Product dimensions (Fig. 3.2)
16