struers Discotom-50 Gebrauchsanweisung Seite 38

Changing the Cut-off Wheel
Flushing the Cutting Chamber
34
Discotom-50
Instruction Manual
Fasten the black handle to stop the cutting handle from
moving.
Press the black locking knob on the right-hand side of the cut-
off wheel, turning the cut-off wheel until the spindle lock
clicks.
Remove the nut with a fork spanner. Remove the flange and
the old cut-off wheel.
Mount the new cut-off wheel.
Mount the flange and the nut. Tighten carefully.
Pull out the flush hose from the front of the machine.
Point the flush hose towards the bottom of the cutting
chamber.
Turn the cooling valve clockwise to flushing position.
Clean the cutting chamber.
Turn the cooling valve counter-clockwise to cooling position.
Always leave the protection guard open to let the cutting
chamber dry.