Description Of The Appliance; Commissioning; Installation Of The Appliance; Preparing The Appliance - Silvercrest SMW 900 EDS A1 Bedienungsanleitung

Risk of fire!
NEVER use the grill stand or other metallic objects
when you are using the appliance in the microwave
mode or in the combination cooking process.
Metals reflect the microwave radiation and it leads
to the generation of sparks. This could cause a fire
and irreparably damage the appliance!

Description of the appliance

1 Display
2 Door opener button
3 Turntable
4 Rollers
5 Cold air intake
6 Combination button Microwave Convection
7 Grill Button
8 Clock/Timer button
9 Convection button
0 Control dial/Button Start/Quickstart
q Stop/Child safety
w Weight/Kitchen timer button
e Combination button Microwave Grill
r Operation (Microwave) button
t Grill stand

Commissioning

Installation of the appliance

Risk of fire!
This microwave oven is not suitable for installation
in a kitchen cabinet. In closed cabinets sufficient
ventilation for the appliance cannot be assured.
The appliance could be damaged and there would
be the additional risk of a fire!
• Select an even surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum distance
of 10 cm from neighbouring walls/surfaces.
Make sure that the door of the microwave
oven can be opened easily.
Maintain a gap of at least 20 cm above the
microwave oven.
• Ensure that the electrical plug is accessible
without problem, so that in case of danger it
can be easily reached and removed.
• Do not remove the pads underneath the micro
wave oven.
• Do not block the ventilation openings 5. If you
do, it could cause damage to the appliance.
• Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions of
radio and televsision reception.
Warning:
Do not install the microwave above a cooker or any
other appliance generating heat. Installation at such
a location could cause damage to the appliance
and thereby a subsequent lapse of the warranty
provisions.

Preparing the appliance

• Remove all packaging materials and any
protective film on the surface of the housing.
• Insert the plug into a mains power socket.
Use a 230 240 V, 50 Hz mains power socket
with a 16 A fuse. It is recommended that the
microwave oven is powered from its own ring
main. If you are unsure about how to connect
the microwave oven, consult a specialist.
- 8 -