Maintenance Work; Wear Parts; Main Parts - Stihl TSA 230 Gebrauchsanleitung

English
– Consequential damage caused by continuing
to use the product with defective components.
19.1

Maintenance Work

All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
things, this includes:
– Damage to the motor due to neglect or defi‐
cient maintenance (e.g. not cleaning cooling
air inlets).
– Damage to the charger caused by incorrect
electrical connection (voltage).
– Corrosion and other consequential damage to
the machine, battery and charger due to
improper storage and use.
– Damage to the product resulting from the use
of poor quality replacement parts.
19.2

Wear parts

Some parts of the machine are subject to normal
wear and tear even when the machine is used in
conformity with its intended use. These parts
must be replaced in due time, depending on the
nature and duration of use. These include,
among others:
– Abrasive wheel
– Battery
56

20 Main Parts

1
#
6
5
7
8
16
15
13
14 14
17
1 Battery compartment
2 Water nozzle
3 Spindle locking mechanism
4 Abrasive cutting wheel
5 Water attachment
6 Shut-off valve
7 Guard
8 Front thrust washer
9 Handlebar
10 Trigger
11 Trigger switch lockout
12 Rear handle
13 Retaining latch
14 Safety catch for locking battery
15 Battery
16 Pushbutton for activating the light-emitting
diodes (LEDs) on the battery
17 Light-emitting diodes (LEDs) on battery
18 Charger
19 Light-emitting diode (LED) on charger
20 Power cord with power plug
# Machine no.
A Safety information label
B Safety information label
20 Main Parts
3
2
9
11
12
10
20
B
19
18
0458-707-9621-B