Maintenance; Dustbin And Filter - Amibot SWIFT CONNECT Bedienungsanleitung

EN

Maintenance

Dustbin and filter

Dustbin
Figure 1 Figure 2
You should empty the dustbin every time the robot completes a
cleaning cycle. Remove the robot's dustbin by opening the top (Figure
1) and removing the cover and filter to empty it (Figure 2).
Then check that there is no dirt obstructing the robot's vacuum
system.
The filter cannot be cleaned, otherwise it would become damaged.
To extend the filter's life, gently shake it outside to remove any small
dust particles that may have gathered. If the filter is damaged, you
are recommended to replace it to ensure that your robot's filter
performance is maintained.
11