Maintenance
Side brushes
an "L" and the right brush is marked with an "R". The engraved
letters on the side brushes and the robot are there to guide you.
Side brushes must be replaced if you notice that their original
NOTE:
shape has changed.
Side wheels and castor
Wipe the side wheels with a dry cloth to remove built up dust.
Pull firmly on the castor block to remove it. Then remove all the debris
from inside the cavity using a soft cloth. Use a slotted screwdriver to
remove the castor from its frame and wipe it clean. Remove the hair
and other debris caught around the axle.
Unclip
the
side
pulling them upwards and rinse them
under clean water. Wait until they are
completely
dry
Check that the left brush is marked with
23
brushes
by
before
reusing
EN
gently
them.