Herunterladen Inhalt Inhalt Diese Seite drucken

Spec -Special Functions - Futurelight MH-840 Washlight Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

- Reset Function
Press [Enter] key to run reset. This option enables the MH-840 to index all effects (functions) and return to
their standard positions.

SPEC -Special functions

Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing
[Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]
keys to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
- Lamp On automatically
This menu allows you to turn the lamp on after switching the fixture on and switch on/off the lamp light
sensor.
- Lamp On after switching the fixture on
This function enables to switch on the lamp automatically after switching on the fixture. Use the
[Up] and [Down] keys to select „On" if you wish to switch on the lamp automatically after
switching on the fixture or „Off" if you wish the lamp off after switching on the fixture and press
[Enter] to confirm or [Mode] to cancel and return to the menu.
- Switch On/Off the lamp light sensor
Use the [Up] and [Down] keys to select "On" if you wish to switch the lamp light sensor On and
press [Enter] to confirm or [Mode] to cancel and return to the menu.The option"On" is for the
standard operation.
Use the [Up] and [Down] keys to select "Off" if you wish to switch the lamp light sensor Off and
press [Enter] to confirm or [Mode] to cancel and return to the menu.
Important: The option"Off" is for "emergency operation" only if the lamp light sensor is
defective and you will wait for a delivery of the spare light sensor! If the lamp light sensor
was switched Off, the error messages "LAEr,SnEr,HEAt" will not appear on the display (only
the message "HEAt" will appear if the lamp was turned Off and On within 5 minutes ) and at
switching On of the lamp the electronics will still try to ignite the lamp until it shines (even when
the lamp is damaged or absent), on this account some electronics parts could be damaged!
All manuals and user guides at all-guides.com
40

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

51833040

Inhaltsverzeichnis