Vertical Steam - Bosch VarioComfort 8 Serie Gebrauchsanleitung

2
1
5"
15 cm
20
B O SCH
2 Continuously press the steam release button (14) to release
powerful shots of hygienic steam. Slowly iron the whole
garment to enhance the final result.
Note: The energy saving setting "Eco" cannot be activated while
the "Hygiene" programme is selected.
Note: The "Hygiene" programme changes automatically to
"i-Temp" after 20 minutes. The change will be indicated by 3
beeps and the "i-Temp" LED will flash 5 times. If you want to
continue using the "Hygiene" programme, you would have to
change to another programme by turning the programme
selector (1) and then coming back to the "Hygiene" programme
again.
4. Ironing
1 Press the steam release button (14) for ironing with steam.
Important: When placing the iron on the pad, be sure to first
insert the heel in the upper side of the control panel, as shown
in the figure.
Tip: For better ironing results, iron the last strokes without
pressing the steam release button (14) to dry the garment.
"PulseSteam" function
This appliance has a special function for tackling difficult
creases.
1 Press the steam release button (15). Powerful shots of
steam will be released.

Vertical steam

Can be used to remove creases from hanging clothes, curtains,
etc.
1 Choose the "max" setting by turning the selector (1).
2 Hold the iron in an upright position 15 cm away from the
garment to be steamed.
3 Press the steam release button (14) repeatedly with pauses
of at least 5 seconds.
Warning! : never point the steam jet at garments being
worn, or at people or animals.
* Model dependent