Technical Data; Intended Use; Safety Notes - Bosch Rexroth SMdev Bedienungsanleitung

10/40 Bosch Rexroth AG

1 Technical Data

1 Technical Data
Designation
Order number
Admissible ambient temperature
Admissible relative humidity during operation
Admissible storage temperature
Admissible relative storage humidity
Protection class
Dimensions (W x H x D)
Weight
Table 1:
Änderungen vorbehalten
2

Intended Use

The SMdev interface module is intended for
installation in the KE31x communication unit.
Operation in the SE3x2 or SEH3x2 is not
permitted. A tightening system is controlled
via this interface. It enables the cyclic data
interchange via DeviceNet according to
DeviceNet Specification Volume I Release
2.0 Errata 5 and Volume II Release 2.0 Errata
5. The following data rates (Baud rates in
kbit/s) are supported: 125 (default), 250,
500.
SMdev | 3 609 929 A77/06.02
SMdev
0 608 830 248
0 up to 55°C with fan
20% up to 90% non-condensing
–20°C up to 70°C
20 - 95 %
IP 20 im eingebauten Zustand
24 mm x 81mm x 219 mm
0.15 kg
3

Safety Notes

The data specified above only serve to
describe the product. No statements
concerning a certain condition or suitability
for a certain application can be derived from
our information. The information given does
not release the user from the obligation of
own judgment and verification. It must be
remembered that our products are subject to
a natural process of wear and aging.
Keep this technical information in a place
easily accessible for all users.
The technical information is intended for
specially trained personnel who have a
specialized knowledge of the machine's
hardware components.
Repairs or other operations on the
hardware or software of our
products, which are not described
in these instructions, may only be
carried out by Rexroth experts.