Use the dial 8 to set the desired time display:
Position of control
12 H
24 H
Press the dial 8 to confirm your selection .
The hour display is flashing . Use the dial 8 to
set the hours .
Press the dial to confirm your selection .
The minute display is flashing . Use the dial 8
to set the minutes .
Press the dial to confirm your selection .
The time is set now .
Setting the timer
The product has a timer that can be used
independently of the product's operation .
Press
7 .
Use the dial 8 to set the desired time:
Time setting
(Timer)
less than 5 minutes
from 5 to 10 minutes
from 10 to 30 minutes
from 30 to 95 minutes
Press the dial 8 to confirm your selection . The
set time is counted down . After approximately
3 seconds, the current time is shown again . The
timer continues to run in the background .
Time display
12 hour mode
24 hour mode
is shown in the display 4 .
Time increments
10-second increments
30-second increments
1-minute increments
5-minute increments
NOTE: If you wish to check the progress of the
timer: Press
a short time .
As soon as the time has elapsed, a beep
sounds .
Cancelling/stopping the input
process
Cancel the input process: Press
product switches to the standby mode .
Child lock
Activate this setting to prevent accidental activation
by children and other persons not familiar with the
operation of the product .
Activate child lock: Press and hold
2 short beeps sound . Continue to press
until a beep sounds and
display 4 . The buttons and the dial are now
deactivated .
Deactivate child lock: Press and hold
9 until a beep sounds and
display 4 .
Cooking food
m
WARNING! Risk of fire! Never use metallic
objects when you are using the product . Metals
reflect the microwave radiation and this leads to
the generation of sparks . This can cause a fire
and irreparably damage the product!
NOTE: During the cooking process, press
5 . The current power level is shown for a few
seconds in the display 4 .
7 . The time is displayed for
10 . The
is shown in the
goes off in the
GB/MT
9 .
33