Cleaning The Work Vehicle; Irrigation Hosepipe; Irrigation Hosepipe Laying Attachment - Checchi & Magli AL Bedienungs- Und Wartungsanleitung

Cleaning the work vehicle

Clean the work vehicle with a high-pressure water jet
and, if necessary, with approved detergents.
The liquid used for washing could be hazardous for the
environment due to the presence of pollutants such as
detergents, oils, etc., therefore do not simply dump the
Troubleshooting
The following list contains a number of common problems that may arise during work, together with the ways to
solve them.
Fault
The plastic mulch sheet
rips or tears
The plastic mulch sheet
lifts off the ground
The hosepipe is not
lying properly
English language
MAINTENANCE INFORMATION
Likely cause
The mulch sheet route is not
correc
The pressure wheels are not set
properly
The mulch sheet idle roller is not
positioned correctly
The mulch sheet unrolling
tension is not correct
The width of the roll is not right
for the size of the laying or
planting bed
The mulch sheet route is not
correct
The roll is not centred in relation
to the hoeing shares
The pressure wheels are not set
properly
The hoeing shares are not set
properly
The ridging disks are not set
properly
The mulch sheet idle roller is not
positioned correctly
The support wheels are not set
properly
Adjust the mulch sheet unrolling
tension
The width of the roll is not right
for the size of the laying or
planting bed
The hosepipe route is not correct Correct the hosepipe route
The hosepipe unrolling tension is
not correct
wastewater; dispose of it in suitable areas equipped with
separation devices for the pollutants.
Dry with compressed air and lubricate the components
shown (see "Lubrication diagram").
Solution
Correct the route
Adjust the pressure wheels
Adjust the mulch sheet idle
roller
Adjust the mulch sheet
unrolling tension
Check roll width
Correct the route
Adjust the hoeing shares
Adjust the pressure wheels
Adjust the hoeing shares
Adjust the ridging disks
Adjust the mulch sheet idle
roller
Adjust the support wheels
Adjust the mulch sheet
unrolling tension
Check roll width
Adjust the unrolling tension
34
7
Reference
See "Mulch sheet laying
procedure" and "Procedure for
simultaneous bed making and
mulch sheet laying"
See "Adjusting the pressure
wheels on plastic mulch sheet"
See "Adjusting the support
for the mulch sheet roll - idler
roller"
See "Adjusting the mulch sheet
unrolling tension"
See "Plastic mulching machine
technical specifications" or
"Technical specifications of the
combined bedding and plastic
mulching machine"
See "Mulch sheet laying
procedure" and "Procedure for
simultaneous bed making and
mulch sheet laying"
See "Adjusting the hoeing
shares"
See "Adjusting the pressure
wheels on plastic mulch sheet"
See "Adjusting the hoeing
shares"
See "Adjusting the ridging
disks"
See "Adjusting the support
for the mulch sheet roll - idler
roller"
See "Adjusting the support
wheels (AL)" or "Adjusting the
support wheels (S 14 PLUS)"
See "Adjusting the mulch sheet
unrolling tension"
See "Plastic mulching
machine specifications"
or "Specifications for the
combined bedding and plastic
mulching machine"
See "Irrigation hosepipe" or
"Irrigation hosepipe laying
attachment"
See "Irrigation hosepipe"
Use and maintenance