SPORTSTECH KS550 Benutzerhandbuch Seite 25

Note:
Before suspending the rods, you must slide the two enclosed plastic door frame protection
blocks onto the rod so that the support surface faces the floor. As soon as you clamp the bar
to the door, you can adjust the protection blocks (move them back and forth) so that they cover
the largest possible area of the door frame. This ensures a stable support.
Note:
The range of the optional dip station can be individually
adjusted. There are six screw holes in the horizontal dip
station rod, three of which are on the left and three on
the right. When screwing the Dip-Station together, we
recommend using the two inner screw holes.
2x
M8 bolt screw
25
2x 2x
Washer M8 nut
EN