Checchi & Magli PLASTIC-STOP PLUS Bedienungs- Und Wartungsanleitung Seite 73

Irrigation hosepipe laying attachment
The laying attachment is used to dig a furrow in the ground and lay the irrigation hosepipe inside it.
UN41 0242IH
- Laying attachment assembly
1) Position the laying attachment on the work vehicle.
2) Fit the U-bolts (A).
3) Tighten the nuts (B).
4) Unwind the hosepipe, following the route shown in
the figure.
Raised bed former and shaping roller
The raised bed former is used for shaping slightly raised seedbeds or planting beds and can be used in both mulching
operations and seeding or planting operations in bare ground.
The illustration shows the main parts of the raised bed former.
A
UN41 0568CN
A) Conveying disk
B) Support wheel
C) Raised bed former
English language
ENCLOSURES
- Adjust the laying attachment
To adjust the laying attachment, proceed as outlined be-
low.
1) Loosen the nuts (C).
2) Raise or lower the laying attachment to alter the
hosepipe laying depth.
3) Tighten the nuts (C).
C
B
D) Shaping roller
E) Shaping roller scraper blade
33
A
E
D
Use and maintenance