Maintenance Information - Checchi & Magli DUAL 12 COMPACT Bedienungs- Und Wartungsanleitung

Umpflanzmaschine

Inhaltsverzeichnis

Verfügbare Sprachen

Safety advice for maintenance

Maintenance work must be carried out with the work

vehicle on flat, compact ground, with the tractor en-

gine off, parking brake engaged, and ignition key re-

moved, and adopting all the necessary safety meas-

ures required to work safely.

Any maintenance operations that can be carried out

on the business premises come under the ordinary

Maintenance interval schedule

To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-

turer is carried out.

Interval

Component

Dispenser

Every work hour

Ploughshare

Lift frame

Every work day

Safety devices

Warning and hazard plates

Machine components

Every 50 hours of work

Nuts and bolts

Every 150 hours of work Tyres

Cleaning the ploughshare

Clean the ploughshare to remove any debris, mud, peat,

plant residues etc that may have built up during use.

Lack of cleaning will limit the ejector range, therefore, as

well as affecting the machine's operation, it also causes

serious mechanical damage.

Proceed as outlined below.

1) Lift the work vehicle off the ground.

2) Loosen the wing nut (A).

3) Turn the lock lever (B).

4) Push the share forwards and turn it so it is facing

downwards.

5) Clean the ploughshare with the tool provided (C).

6) Once the cleaning is complete, replace the plough-

share in the working position.

7) Check that the Plant Control device (D) is inside the

share.

8) Make sure that the share is secured in place with the

lock lever (B).

9) Tighten the wing nut (A).

English language