Checchi & Magli DUAL 12 COMPACT Bedienungs- Und Wartungsanleitung Seite 65

Adjusting the tilt of the packing wheels
Tilting the packing wheels will increase or decrease the
compaction of the soil around the seedlings.
To adjust the tilt of the packing wheels proceed as out-
lined below.
1) Loosen the nuts (A).
2) Turn the support (B) to change the tilt of the packing
wheels.
3) Tighten the nuts (A).
Adjusting the packing wheel scraper
The scraper is used to clean the packing wheels, remov-
ing any soil and debris that has built up.
Proceed as outlined below.
1) Loosen the screw (A).
2) Turn the scraper (B) until it reaches the desired posi-
tion.
3) Tighten the screw (A).
Adjusting the Plant Control
The Plant Control device stops the seedlings falling
downwards before they are ejected.
Move the device down for smaller seedlings and up for
taller seedlings.
For adjustments, proceed as outlined below.
1) Unscrew the screws (A).
2) Remove the casing (B).
3) Slightly loosen wing nut (C).
4) Adjust the device (D) as required.
5) Tighten the wing bolt (C).
6) Position the casing (B).
7) Tighten the screws (A).
English language
ADJUSTMENT INFORMATION
A
UN41-0487MM
B
UN41-0482MM
C
UN41-0488MM
15
5
B
A
D
A B
Use and maintenance