Ze-Geräteregistrierung (1) - ABB RELION REB500 Handbuch

Abschnitt 9
Anhang B | Konfigurationsmodus - Systemkonfiguration
9.34 ZE-Geräteregistrierung (1)
IEC18000860 V1 EN-US
Siehe
84
Abschnitt 5.7.
© 2019 - 2021 Hitachi Power Grids. Alle Rechte vorbehalten
CU device creator
After the basic setfile configuration, the single-line diagram and the
bay configuration are completed, the design wizard for the Central
Unit (CU) shall be started.
 Press Next.
The hardware design wizard starts the configuration process
of a Central Unit suited for the bays (Bay Units) configured
under the single-line diagram.
In addition the CU specific hardware (settings) shall be
defined:
 Redundant power supply on CU (or not)
 Power supply type (voltage range)
 Set the number of BIO boards (number of I/O's)
 Press Next.
1MRK 511 452-UDE Rev. C
GUID-2B881384-B924-4FAE-A98E-0C398157C0E7 v2
Dezentraler Sammelschienenschutz REB500
Engineering-Handbuch