Sld-Conf - Sammelschienenzuordnung (3) - ABB RELION REB500 Handbuch

1MRK 511 452-UDE Rev. C
9.33 SLD-CONF – Sammelschienenzuordnung (3)
Warning: If the bus zones reassignment process is started with the button "Reassign Buszones", the configurator
tool also performs the reassignment of the bus zone related signals (I/Os) in the background. The reconfiguration
of a complex system (setfile) can induce a changed signal configuration compared to the original setfile. These (bus
zone related) signals have to be worked over under the binary module configuration of the central unit (CU) now.
IEC18000859 V1 EN-US
Dezentraler Sammelschienenschutz REB500
Engineering-Handbuch
© 2019 - 2021 Hitachi Power Grids. Alle Rechte vorbehalten
Anhang B | Konfigurationsmodus - Systemkonfiguration
GUID-84006325-F3A6-4ACB-8AF6-13E84E6702AD v3
Reassign Buszones
Press button Reassign Buszone only
if the assignment made by the
system is incomplete.
Abschnitt 9
83