Civco ENVISION Bedienungs- Und Referenzhandbuch Seite 4

English
3. Apply exposed adhesive directly to transducer face.
WARNING
Ensure no air bubbles are present prior to use. Air left between cover and transducer lens may cause poor
n
image quality.
4. Inspect cover to ensure there are no holes or tears.
5. Use suitable hydration source, such as liquid saline or a saline wipe, to fully saturate patient. To prolong scan
time, fully saturate Envision as well.
NOTE: Envision may be hydrated multiple times. Rehydrate as necessary.
6. Ensure Envision is fully hydrated prior to use.
ALTERNATE WORKFLOW - ADHERING ENVISION DIRECTLY TO PATIENT
1. Hold Envision with liner and images facing upward.
2. Peel liner to expose adhesive.
3
Envision™