4.1
front trim removal / installation
WARNING
!
•
Before the front trim or glass is removed or installed, unplug the appliance and wait until it is cool to the touch.
•
Trim can be heavy and fragile. Handle with care.
note:
Removal / installation steps are the same for both sides of appliance (i.e. front and back).
Remove the 2 screws holding the front trim in place (Fig. 4-1). Set screws aside.
A.
Have 2 people lift the front trim off the hooks located inside the firebox (Fig. 4-2). Place front trim face
B.
down on a soft, non-abrasive surface.
Reverse these steps to install the front trim.
C.
Repeat on
opposite side.
4.2
front glass removal / installation
Remove the 5 screws holding the front glass in place (Fig. 4-3).
A.
Have 2 people lift the front glass up and out, pivoting it away from the side panels (Fig. 4-4). Place the
B.
front glass face down on a soft, non-abrasive surface.
Reverse these steps to install the front glass.
C.
Repeat on
opposite side.
Fig. 4-1
1
2
opposite side.
Fig. 4-3
4.0 finishing
Some parts
hidden for
clarity.
Repeat on
opposite side.
1
2
Repeat on
W415-3030 / 04.30.21
EN
Fig. 4-2
Fig. 4-4
17