Finishing; Burn Pot / Burner Installation; Wmfe1; Wmfe2, Wmfe3 And Wmfe4 - Napoleon WMFE1 Installations- Und Bedienungsanleitung

5.0 FINISHING

5.1

BURN POT / BURNER INSTALLATION

The plastic fi lm MUST be removed from the stainless steel fi rebox/burner prior to operating the
appliance.
When removing the plastic fi lm from the stainless steel fi rebox/burner, there may be traces of plastic residue
which can be easily removed using stainless steel cleaner.

5.1.1 WMFE1

A. Remove the glass fender if installed.
B. Place the three empty burn pots into the holes in the fi rebox.

5.1.2 WMFE2, WMFE3 AND WMFE4

A. Remove the glass fender if installed.
B. Position the empty burner with the locating tabs towards
the back of the fi rebox.
C. Slide the locating tabs through the locating slots at the
back of the fi rebox. Ensure the burner is resting fl at along
the fi rebox bottom.
11
BURNER
LOCATING
SLOT
BURNER
LOCATING
TAB
W415-0958 / C / 03.01.12