Maintenance - Bell & Ross BR 03-93 GMT Technische Anleitung

BR 03-93 GMT
BR-CAL.303
GENERAL USAGE
When the watch has stopped (crown in position 0): wind the
Starting the watch.
movement by rotating the crown clockwise. After approximately 40 rotations, the
watch is fully wound (the winding mechanism does not have a stop to prevent over-
winding). The power reserve is approximately 40 hours when fully wound. When the
watch is worn , the automatic mechanism will wind the movement.
Pull the crown out to position 2. The seconds hand will stop, enabling
Setting the time.
you to set the time to the nearest second. Set the time by rotating the crown in the
required direction.
USING THE GMT_24H FUNCTION
: (crown in position 2). The seconds hand will stop,
Setting the time Time zone 1
enabling you to set the time to the nearest second. Set the time by rotating the crown
in the required direction.
Setting Time zone 2 (crown in position 1). Place the bezel in the neutral position
(triangle on the bezel opposite the 12 index on the dial). Turn the crown clockwise in
order to set the GMT-24H hand (C) to the hour digit of the 2nd time zone on the bezel.
The GMT hand moves around the dial in 24 hours. The rotating bezel therefore displays
the hours on a graduated 24-hour scale. The daytime hours are in red and the night
time hours are in black.
Setting Time zone 3 . A 3 time zone can be displayed using the rotating bezel and the
rd
GMT-24H hand. To display the 3rd time zone, turn the bezel clockwise (negative time
difference) or anticlockwise (positive time difference) in order to set the hour digit of
the 3 rd time zone on the GMT-24H hand.
A
B
C
D
E F
(x4)
STRAP MOUNTING
Attachments (H) with screws on the outer face of the lugs
The 4 socket head screws (hexagon socket/1.3 mm diam-
eter) mount the strap to the case attachments. These
screws must be handled carefully, using the 2 tools sup-
plied with the watch in its box.
IMPORTANT
. As with all mechanical watches with a date function, quickset
*Quickset date setting
date setting (crown in position 1) MUST NOT UNDER ANY CIRCUMSTANCES be carried
out between the times of 9 P .M. (21:00) and 3 A.M. (03:00).
Magnetic fields . Magnetic fields can adversely affect the accuracy of your watch. Also,
we would recommend that you avoid placing your watch near electronic devices that
may generate large magnetic fields (radio, smartphone, television, computer, tablet,
loudspeakers etc.).
Water resistance . Once the watch is set, to ensure perfect water resistance, push the
crown back to position 0. Never operate the crown underwater.
: The 4 slotted screws (E) mount the bezel to the case and ensure the water resis-
Note
tance of the watch. To benefit from the Bell & Ross warranty, these screws must never
be unscrewed.
Setting the date.
set the date by rotating the crown anticlockwise. Slow setting (crown in position 2): to
ensure the date changes at midnight rather than noon, it is recommended you set the
date by adjusting the hands of the watch. Pull the crown out to position 2 and turn the
hands until the date changes. Then set the precise time.
EXAMPLE OF DISPLAYING 3 TIME ZONES
Time zone 1
Time zone 2
Time zone 3
A. Minute hand
B. Hour hand
C. Hand for the second time zone
D. Seconds hand
0 1 2
E. Case attachment screws
F. Bi-directional rotating bezel with 24-hour scale
G. Date
H. Strap attachment
I. Crown
I
0. Wind the movement manually (rotate clockwise).
H
1. Set the second time zone (rotate clockwise)
2. Set the time (rotate in either direction)
G

MAINTENANCE

After being immersed in seawater, it is recommended to carefully rinse off the watch
and strap with fresh water. It is also recommended to have the water resistance of
your watch checked every two years. To ensure a service that meets the brand's exact-
ing standards, any servicing of your watch must be carried out by the Bell & Ross
service centre or a watchmaker approved by Bell & Ross. Whenever repairs are made
during the warranty period, you must present the Bell & Ross warranty card, duly dated
and signed by the retailer at the time the watch was purchased.
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be activated at the
time of purchase by your approved Bell & Ross point of sale, and presented every time
an intervention is performed. You can now access the digital version of this card and all
the information relating to your watch by scanning the QR code or visiting:
www.bellross.com/warranty
To ensure a service that meets the brand's exacting standards, any servicing of your
watch must be carried out by the Bell & Ross service centre or a watchmaker approved
by Bell & Ross.
2
Quickset* (crown in position 1): pull the crown out to position 1 and
Dial: it is 10:10 in Geneva
Bezel (triangle at midday): it is 16:10 in Hong Kong
-12
Bezel (after rotation): it is 04:10 in New York
(NEVER UNSCREW)
Set the date (rotate anticlockwise)
ENGLISH
-12