Accessories; Motorized Work Table - Leica FS M Bedienungsanleitung

9. Accessories

A specially developed work table and correctly
sized work chair allow ergonomically optimized
work.

9.1 Motorized work table

The work table with motorized height adjustment
is designed for optimum ergonomic conditions
when working at the comparison macroscope.
Its table surface measures 120 cm x 56 cm and
it is mounted symmetrically on the height-adjust-
able column.
Fig. 30 Motorized work table
1 Buttons for height adjustment
2 Adjustable-height feet
1
2
In addition to various optical accessories, such
as fi lters and stage scales, a number of different
slide holders can be used.
Caution!
When setting up the comparison macroscope,
make sure that the stand is positioned exactly
over the adjustable-height column.
After the power supply is connected, the work ta-
ble can be continuously adjusted within a range
of approx. 62 to 92 cm over fl oor height. To do so,
use the buttons (30.1).
The lifting speed is approx. 12 mm/sec. The lifting
capacity is approx. 2000 N.
If the fl oor on which the work table is installed is
not completely level, differences in level can be
compensated for by screwing the feet (30.2) in or
out
9. Accessories
21