Stackable Stages - Leica FS M Bedienungsanleitung

9. Accessories

9.2 Stackable stages

The macroscopes are equipped with manual
cross-stages.
Stage surface:
Travel range of the stage:
On the stage surface, there are threaded bore
holes as receptacles for the adjustable holder
(universal holder), rotating stages ø 118 mm,
large sample stages and rotation device for tool-
mark examinations.
22
140 mm x 202 mm
50 mm x 50 mm
Rotating stages ø 118 mm
Rotating stages, which can be stacked on the
basic equipment cross-stages (Fig. 32), are fas-
tened using two Allen screws. They are suitable
for incident light and transmitted light examina-
tions. The rotating stages each have one opening
in the center, which is sealed with a removable
glass plate (32.3). The threaded bore holes on
the stage surfaces are provided for screwing on
the adjustable holder. Additionally, there are also
holes for inserting the stage clips. The rotating
stage surface can be locked into place using a
fastening screw (32.2).
In the bottom parts of the rotating stages, there are
receptacles for inserting the polarizers (32.1) with
λ-plates (red = OK). These can be rotated 90°.
Fig. 32 Rotating stage ø 118 mm
1 Filter slot for polarizer
2 Fastening screw
3 Glass plate
3
2
1