Objectives; Tube; Eyepieces - Leica FS M Bedienungsanleitung

7.3 Objectives

The position of the individual objectives is preset
at the factory. The object turret eyes are labeled
(5.2).
!
Caution!
The objectives for the left and right objective
nosepiece are packed separately. When screw-
ing in the objectives, make sure you put them in
the right side.
• Screw the objectives into the objective turret.
Position Objective
50 0.4x
100 1x
200 2x
500 4x
1000 8x
Note:
The SL 0.3:1 auxiliary lens (order No. 11 532 301),
which is attached to the objective, is available for
the objective 0.4x. 1:1 imaging is achieved using
the auxiliary lens.

7.4 Tube

• Slacken the clamp screw on the tube mount
• Put the tube into the mount.
• Retighten the clamp screw.
Note:
If using the optional magnifi cation changer, insert
it between the tube mount and the tube and fi x in
position with the clamp screw.

7.5 Eyepieces

• The eyepieces are inserted into the eyepiece
tubes on the tube.
Fig. 5 Objective turret with objectives
1 Filter receptacle
2 Objective positions
1
2
7. Assembly
15