Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - testo 475 Bedienungsanleitung

Drehzal- und frequenzmessgeraet
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Power supply
The external plug-in mains unit charges the built-in
rechargeable batteries in approx. 3 hours to 50 %
of the rated capacity.
You need approx. 14 hours to charge the rechar-
geable batteries. Note also that the batteries run
down in time.
Changing the rechargeable batteries
If the rechargeable battery is defect send the mea-
suring instrument to an official service point to be
changed.

Maintenance

• Changing the flash tubes
Disconnect the probe from the
measuring instrument before
changing the flash tube
With a small screw-driver, gently pry the
securing ring out of the groove.
14

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis