Service And Maintenance; Checking Electrolyte Gel; Cleaning Housing; Cleaning Probe - testo 206 Bedienungsanleitung

6. Service and Maintenance

6.1 Checking electrolyte gel

6.2 Cleaning housing

6.3 Cleaning probe

Depending on the type of contamination, the following cleaning
substances are suitable:
- Fat: domestic dishwashing liquid
- Protein: pepsin
The use of warm water improves the cleaning effect.
1. Apply dishwashing liquid or pepsin to a cloth and gently wipe
2. Rinse the probe with clear warm water.
3. To stabilize the probe, place in the storage solution for at least
4. Re-calibrate the probe (see 5.4 Calibrating instrument, page
Downloaded from www.Manualslib.com
Check the electrolyte gel in the storage cap regularly for con-
tamination and ensure it is filled to the correct level. Replace
storage cap if necessary.
Clean housing with a damp cloth (soap water) if dirty. Do not
use abrasive cleaning agents or solutions!
TopSafe can also be cleaned in the dishwasher.
Destruction of probe due to incorrect cleaning!
Danger of injury due to glass parts remaining in the
measurement medium.
Use only the cleaning substances stated.
(do not rub, as this leads to static charging).
1 hour (better 12 hours)..
28.
manuals search engine
6. Service and Maintenance
29