Functions; Installing The Water Filter; First Use - Sage the Oracle Touch SES990BTR Kurzanleitung

Functions

INSTALLING THE WATER FILTER

• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Set the reminder for next month of
replacement. We recommend to replace
the filter after 3 months.
• Insert the filter into the two parts of the
filter holder.
• To install the assembled filter holder into
the water tank, align the base of the filter
holder with the adapter inside the water tank.
Push down to lock into place.
• Fill the water tank with cold water, slide and lock
back into position.

FIRST USE

1. Press POWER button to turn the machine on.
2. Follow the instructions on screen to guide
you through first use setup.
3. After completing setup, the machine will
tell that it is ready to use.
The machine is now in STANDBY mode.
NOTE
If your water hardness is either 4 or 5 when
tested, we strongly recommend you change
to an alternate water source.
GRINDING OPERATION
Insert bean hopper into position on-top of
the machine. Turn dial to lock into place.
Fill hopper with fresh beans.
EN
7