Manual Long Black; Hot Water; Programmable Functions - Sage the Oracle SES980BSS Kurzanleitung

OPERATING YOUR NEW APPLIANCE

MANUAL LONG BLACK

This allows you total control over the Long Black
process: pre-infusion duration, espresso volume
and hot water volume. During manual Long Black
mode, the LCD will show a moving cup icon.
Press and hold LONG BLACK dial to activate
pre-infusion. Release LONG BLACK dial to
commence espresso pour.
Press the LONG BLACK dial to stop espresso
pour and commence hot water pour.
Press the LONG BLACK dial again to stop the
pour of hot water.

HOT WATER

The HOT WATER button can be used to pre-heat
cups or add hot water manually.
To stop and start the pour of hot water, press the
HOT WATER button.
HOT WATER
NOTE
You cannot run hot water and extract
espresso at the same time.

PROGRAMMABLE FUNCTIONS

To enter program mode, press the MENU button.
Rotate SELECT dial to the desired function.
Program mode allows you to program:
• Shot Volume
• Shot Temperature
• Clean Cycle
• Set Clock
• Auto Start
• Tamp Set
• Pre-Infusion
• Long Black Adjust
To exit program mode, press MENU button.
PROGRAMMING SHOT
VOLUME / DURATION
Fill the portafilter using the auto grind,
dose & tamp function. Insert the portafilter
into the group head.
While 'SHOT VOL' is displayed on the LCD, rotate
the SELECT dial to '1 CUP' to reprogram the 1
CUP button, or '2 CUP' to reprogram the 2 CUP
button. Press the SELECT dial to start espresso
extraction. When required espresso volume /
duration has been extracted, press SELECT dial
to stop extraction. Machine will beep once to
confirm the new volume / duration.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
MENU
EXIT
EN
11