Konig + Neurath TALO.S Bench Montageanleitung Seite 47

Fitting the clamp-on
side screen
Fix the connection brack-
et (a) to the screen from
below with counter-sunk
screws ø7x70.
Insert sliders (b).
Slide the clamp-on side
screen onto the work-
surface (c).
Note: this screen is not
intended to support
accessories.
Slider (3x)
(b)
3x Pilzgleiter
44
Countersink
on the underside!
(a)
(c)