Herunterladen Inhalt Inhalt Diese Seite drucken

Konig + Neurath TALO.S Bench Montageanleitung Seite 44

Motorisch höhenverstellbare tische
Vorschau ausblenden Andere Handbücher für TALO.S Bench:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Fitting the printer
tray
Fit the console (a) to the
retaining plate (b) using
cylinder head screws M5x8
(SW4). Attach the printer
shelf (c) to the console,
using screws ø6,3x14.
Insert the square shaft (d)
into the desk top frame.
Screw the connecting
clamp (e) to the square
shaft from underneath
through the frame. Use
counter-sunk screws
M8x20 (SW5).
Attach the printer tray re-
taining plate to the connec-
ting clamp (f) with counter-
sunk screws M6x8 (SW4).
Fitting the CPU hol-
der
Attach the CPU-holder (a)
to the retaining plate (b)
with counter-sunk screws
M5x16 (SW3).
Fit the square shaft and
connecting clamp as des-
cribed above.
Attach the CPU holder re-
taining plate (c) to the con-
necting clamp (as descri-
bed above).
The printer tray can be
fitted at the same time if
the retaining plates are
offset from each other.
Safety instructions:
Ensure that the bench and its attachments have a minimum clearance
of 25 mm to other objects in all movable desk positions. Desks arranged
in a block pose a particular risk of crushing and shearing.
You must follow the safety instructions! Improper use of
the system poses a risk of material damage and personal
injury!
(c)
(a)
(e)
(a)
(b)
41
(b)
(d)
(f)
(c)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis