Receiving Measurements Automatically; Rainfall; Hi/Lo Alert - Bresser 7002550000000 Bedienungsanleitung

15 Receiving measurements automatically

Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).

16 Rainfall

The base station displays how many millimeters / inches of rainfall are accumulated over a time
period, based on the current rainfall rate.
Rainfall rate
Select display mode
Press the RAIN button several times until the desired time range is displayed:
RATE
DAILY
WEEKLY
MONTHLY
Select rainfall measurement unit (millimeter or inch)
1. Press and hold RAINFALL button for approx. 3 seconds to change to setting mode.
2. Press UP or DOWN button to change between mm (millimeter) and in (inch).
3. Finally press the RAINFALL button to save the settings and exit the setting mode.

17 HI/LO Alert

HI/LO alert are used to alert you of certain weather conditions. Once activated, an alarm sound is
triggered and the alert icon flashes as soon as a set value is reached. Supported areas and alarm
types:
Area
Indoor temperature
Indoor humidity
Outdoor temperature
Outdoor humidity
Rainfall (daily)
Wind speed
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
14 / 48
Daily rainfall
Current rainfall rate in past hour
Total rainfall rate within the current day, from midnight
Total rainfall rate for current week
Total rainfall rate for current month
Weekly rainfall
Type of alert available
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL*
HI AL
Monthly rainfall