Key Functions - VOLTCRAFT VBM-85 Bedienungsanleitung

MAX The max. peak value is continually measured and recorded
DATA Symbol for data storage
USB Symbol for active USB interface
HOLD Data-hold, the display is "frozen"
10-10KHz Range of the vibration frequency at acceleration measurement
10-1KHz Range of the vibration frequency at vibration strength measurement
10-500Hz Range of the vibration frequency at vibration offset measurement
USb USB setting menu; 0 = off, I = on
APO Setting menu for automatic deactivation; 0 = off, I = on
rEC Setting menu for the data logger interval. 0.5s to 255s
dEF? Call factor settings and delete all data storages.
Button "Enter" = Yes, button "MENU" = No
Battery level display
Display lighting is active.
Automatic deactivation is active.
b) Key Functions
POWER Operating switch; the meter can be switched on and off
A Acceleration measurement
V Vibration strength measurement
D Vibration offset measurement
HOLD Data hold
MAX The max. peak value is continually measured and recorded
READ Read internal data memory
CLEAR Call factor settings and delete all data storages
REC Record data: push briefly = single value recording, push long (2s) = Start data logger recording
MENU Opens the setting menu (USB, APO, dEF?)
ENTER Button for confirmation in the setting menu
Switches the display lighting on and off
Setting button up for value switching
Setting button down for value switching
27