Fixing The In-Wall Skimmer - Swim & Fun Classic Oval Steel Pool Bedienungsanleitung

UK

13. Fixing the In-wall Skimmer

When assembly is finished and before you start to fix the skimmer and the inlet connector kit to the
pool, fill the pool with 5 or 6 cm of water below the position of the inlet connector kit. (See diagram 28)
Warning!
Never permanently install the skimmer or the inlet connector kit before the water is within a few
centimeters of them, because the liner has to be properly taut with the pressure of the water.
13.1 Installing the inlet connector kit and skimmer
Unpack your inlet connector kit and skimmer box from the carton. Carefully read the instructions
below before you start to mount them onto the pool wall.
No. Name
01 Hose attachment
02 Cover
03 Basket
04 Skimmer Housing
05 Weir
06 Gasket
07 Face Plate
MV-2908-2909-2920-2021-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
Quantity No. Name
1 08 Screw (ST5x24)
1 09 Outlet connector
1 10 Inlet connector kit
1 11 Hose clamp
1 12 Teflon tape
2 13 Plug
1
Quantity
12
1
1
2
1
2
143